Samsung ML-3470 Manual De Usuario

.2   

<Network setup(ML-3471ND only)>

Your printer can be set up with a variety of TCP/IP network information, 
such as an IP address, a subnet mask, a gateway, and DNS addresses. 
There are several ways in which your printer can be assigned a TCP/IP 
address, depending on your network.
•  Static addressing: A TCP/IP address is assigned manually by the 

system administrator.

•  Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address 

is assigned automatically by the server.

Before configuring TCP/IP, you need to set the network 
protocol to TCP/IP.

To enter a TCP/IP address from your printer’s control panel, take the 
following step: 

Press Menu until Network appears on the bottom line of the 
display and press OK.

Press OK when TCP/IP appears.

Press the scroll buttons until Static appears and press OK.

Press OK when IP Address appears. 

Set the first byte between 0 and 255 using the scroll buttons and 
press OK to move to the next byte.

Repeat this to complete the address from the 1st byte to the 4th 
byte.

When you have finished, press OK.

Repeat step 5 and 6 to configure the other TCP/IP parameters: 
subnet mask and gateway address.

Press Stop to return to Standby mode.

To have a TCP/IP address assigned automatically by the server, take the 
following step:

Press Menu until Network appears on the bottom line of the 
display. 

Press OK when TCP/IP appears.

Press the scroll buttons until DHCP or BOOTP appears and press 
OK

.

Press Stop to return to Standby mode.

This program is for the network IP setting using the MAC address which 
is the hardware serial number of the network printer card or interface. 
Especially, it is for the network administrator to set several network IPs 
at the same time. 

Insert the driver CD provided along with your machine. 

Start Windows Explorer and open the X drive. (X represents your 
CD-ROM drive.)

Double click Application > SetIP.

Open the language folder you want to use.

Double click Setup.exe to install this program. 

From the Windows Start menu, select Programs > Samsung 
Network Printer Utilities

 > SetIP.

Select the name of your printer and click "

". 

If you cannot find your printer name click "

 " to refresh the 

list.

Enter the network card's MAC address, IP address, subnet mask, 
default gateway, and then click Apply.

 If you do not know the network card's MAC address, print the 
machine's network information report.

Click OK to confirm the settings.

Click Exit to close the SetIP program.

If you are in a non-static IP address environment and need to 
setup a DHCP network protocol, go to the http://
developer.apple.com/networking/bonjour/download/

, 

select the program Bonjour for Windows due to your 
computer operating system, and install the program. This 
program will allow you to fix the network parameter 
automatically. Follow the instruction in the installation window. 
This program does not support Linux.