Samsung ML-331X Manual De Usuario
Media and tray
39
2. Menu overview and basic setup
•
When selecting envelopes, consider the following factors:
-
Weight: should not exceed 90 g/m
2
otherwise; jams may
occur.
-
Construction: should lie flat with less than 6 mm curl and
should not contain air.
should not contain air.
-
Condition: should not be wrinkled, nicked, nor damaged.
-
Temperature: should resist the heat and pressure of the
machine during operation.
machine during operation.
•
Use only well-constructed envelopes with sharp and well-
creased folds.
creased folds.
•
Do not use stamped envelopes.
•
Do not use envelopes with clasps, snaps, windows, coated lining,
self-adhesive seals, or other synthetic materials.
self-adhesive seals, or other synthetic materials.
•
Do not use damaged or poorly made envelopes.
•
Be sure the seam at both ends of the envelope extends all the
way to the corner of the envelope.
way to the corner of the envelope.
1
Acceptable
2
Unacceptable
•
Envelopes with a peel-off adhesive strip or with more than one
flap that folds over to seal must use adhesives compatible with
the machine’s fusing temperature for 0.1 second (about 170°C
(338 °F)). The extra flaps and strips might cause wrinkling,
creasing, or jams, and may even damage the fuser.
flap that folds over to seal must use adhesives compatible with
the machine’s fusing temperature for 0.1 second (about 170°C
(338 °F)). The extra flaps and strips might cause wrinkling,
creasing, or jams, and may even damage the fuser.
•
For the best print quality, position margins no closer than 15 mm
from the edges of the envelope.
from the edges of the envelope.
•
Avoid printing over the area where the envelope’s seams meet.
1
Pressure lever
1
1
2