Samsung SCX-1150F Manual De Usuario

FAX

• If you have set your product to ANS/FAX mode and your answering 

machine is switched off, or no answering machine is connected to 

your product, your product will automatically go into FAX mode 

after 10* rings. 

• If your answering machine has a ‘user-selectable ring counter’, set 

your product to answer incoming calls within 1 ring. 

• If you are in TEL mode (manual reception) when the answering 

machine is connected to your product, you must switch off the 

answering machine, or the outgoing message from the answering 

machine will interrupt your phone conversation. 

* This switching interval from ANS/FAX to FAX varies by country regulations.

For example, it is 10 rings in UK, and 6 for most of other countries.

If you are using the external telephone connected to the EXT jack 
on your product, you can answer calls and start the product to 
receive a fax.

Press Receive Mode until you see “TEL” on the bottom line. 
Then press Enter.

When the telephone rings, answer it by picking up the handset 
of the external phone.

If you hear a fax tone, or if the person on the other end asks 
you to receive a fax, press the keys “  9  ” (star nine star) 
on the extension telephone. 

If you still hear the fax tone from the remote machine, try 
pressing “  9  ” once again.

“  9  ” is the remote receive start code preset at the 
factory. The first and the last asterisks are fixed, but you can 
change the middle number to whatever you choose. For more 
information, see page page 5.44.

When the product starts receiving the document, replace the 
handset of the extension telephone.