Samsung SCX-1150F Manual De Usuario

FAX

Feed the document(s) to be faxed face up into the ADF until 
“DOCUMENT READY” appears in the display.

Or

Place a single document on the document glass face down 
then close the cover. For details on loading original 
document(s), see page page 3.3.

You can adjust the resolution and the contrast to suit your fax 
needs. For details, see page page 5.4.

Press Setup. The display shows “1.SYSTEM SETUP” on the 
bottom line.

Press the Scroll buttons (  or  ) until you see 
“4.ADVANCED FAX” and then press Enter. The display shows 
the first advanced fax feature “BROADCASTING” on the 
bottom line.

Press the Scroll buttons (  or  ) until you find “SEND 
POLLING” on the bottom line and then press Enter. 

The display asks you to enter a 4-digit poll code. The poll code 
is preset to 0000 at the factory, which represents no poll 
code.

If you want to use a poll code, enter the desired 4-digit code 
(except for 0000) and then press Enter. 

Or

If you do not want to secure the transmission with a poll code, 
press Enter when the display shows “0000” for the poll code, 
or enter 0000.

The product stores the document in the memory. 

The display counts the number of pages being stored in the 
memory and the memory capacity remaining.

If the document is fed from the document glass, the display 
shows “NEXT GO ON?” on the top line after the document is 
scanned into the memory. If you have the next page, remove 
the scanned page and load the next page on the glass and 
press Enter. Repeat as necessary.