Samsung SCX-1150F Manual De Usuario

Troubleshooting

The scanner does not 

scan.

• Make sure you place the document to be scanned face 

down on the document glass.

• There may not be enough available memory to hold the 

document you want to scan. Try the Pre-Scan function to 

see if that works. Try lowering the scan resolution rate.

• The USB or parallel cable is not connected properly.
• The USB or parallel cable is defective. Swap the cable with 

a known good cable. If necessary, replace the cable.

• If using a parallel cable, ensure that it is compliant with 

the IEEE 1284 standard.

• The scanner is configured incorrectly. Check scan setting 

in the SmarThru Configuration or the application you want 

to use to make certain that the scanner job is being sent 

to the correct port (for example, LPT1).

The unit scans very 

slowly.

• Graphics are scanned more slowly than text.
• Communication speed becomes slow in scan mode 

because of the large amount of memory required to 

analyse and reproduce the scanned image. Set your 

computer to ECP printer mode through BIOS setting. It 

will help to increase the speed. For details on how to set 

BIOS, refer to your PC documentation.

The following message 

appears on the 

computer screen: 

Scanner is busy 

receiving or printing 

data. When the 

current job is 

completed, try again.

There may be a copying or printing job in progress. When 

the current job is completed, try  the job again.