Samsung SCX-1150F Manual De Usuario

Copy

First make sure you have paper loaded, following the instructions 
in “Loading Paper” on page 1.11. Then you have to set the paper 
size and type using the operation panel buttons.

 These settings are applied to the stand-alone copy mode only. 

In PC printing mode, you have to select the paper type and size in the 

application program you use.

After loading paper, take the following steps to set the paper size 
from the operation panel:

Press Setup. The display shows “1.SYSTEM SETUP” on the 
bottom line.

Press the Scroll buttons (  or  ) until you see “3. COPY 
SETUP” and then press Enter. 

The first copy setup menu “PAPER SIZE” appears on the 
bottom line. Press Enter. 

The current setting is tagged with a   at the end of the 
display on the bottom line.

Press the Scroll buttons (  or  ) until you see the paper 
size you are using in the display.

Press Enter to save the selection.

 When you use legal-size paper, do not pull out the paper 

output tray. If you do, a paper jam may occur.