Samsung SCX-1150F Manual De Usuario

Copy

The following buttons on the operation panel let you make all the 
basic settings: copy quality, contrast, number of copies and copy 
size.

 The option settings for the current copy job will be 

automatically reset to their default status (see 3.15) 2 minutes after 

the job is completed. If necessary, you can reset the copy option 
immediately by pressing 

Cancel/Reset.

To select the copy quality, use the 

Quality button on the operation 

panel. You can select BEST, NORMAL, or DRAFT. The BEST mode is 
good for documents with fine details. The copy quality is good but 
the copy speed is low. The NORMAL mode works well for normal 
documents (text). The DRAFT mode can be used for fast copying 
with lower resolution.

To select copy quality:

Press 

Quality. The current setting is tagged with a   at the 

end of the display. 

Scroll through the options available by pressing Quality 
repeatedly or using the Scroll buttons (  or  ).

When the desired mode is displayed, press Enter to save the 
selection.

 

• While the 

Paper Save mode is enabled, the print quality you 

selected through the 

Quality button is ignored and automatically 

applied to “NORMAL.”

• With an optional photo cartridge installed in the product, if you 

select the DRAFT setting, the display shows “LOAD BLACK INK” 

when you start copying and the product cannot print.