Samsung CLP-775 SERIES Manual De Usuario

Machine status and advanced features_ 56

7.

machine status and advanced features

This chapter explains how to browse the current status of your machine, and the method of setting for the advanced 
machine setup. Read this chapter carefully in order to use your machine's diverse features.

•

•

•

•

•

•

•

•

•

•

  

1. Press 

 on the control panel.

2. Press up/down arrow to highlight the desired setting and press OK.
3. If the setting item has sub menus, repeat step 2.
4. Press up/down arrow to access the required value.
5. Press OK to save the selection.

6. If you want to move to the upper level menus, press 

.

7. Press 

 to return to ready mode.

You can print the menu map which shows the 

layout and current settings of this machine.

You can print a report on the machine's overall 

configuration.

You can print the supply information page.

You can print the demo page whether your 

machine is printing properly or not.

You can print the PCL font list.

You can print the PS font list.

a

a.This menu item is available when the optional hard disk is installed.

You can print jobs currently stored in the hard 

disk.

You can print the list of completed print jobs.

The usage page contains the total number of 

pages printed by person or group.

You can print a report on the number of 

printouts.

This menu allows you to select the direction in 

which information is printed on a page.

Set the margins for print materials. The margins 

you set here will be applied when printing from 

all trays.

•

Simplex:  Set the margin of print materials 

for one-sided printing. 

•

Duplex:  Set the margins for double-sided 

printing. 

•

Binding:  When printing on both sides of 

paper, side A's margin closest to the binding 

will be the same as side B's margin closest to 

the binding. Likewise, the sides' margins 

farthest from the binding will be the same.

Set the margins for print materials. The margins 

you set here will be applied when printing from 

the tray1 and optional trays.

•

Simplex:  Set the margin of print materials 

for one-sided printing.

•

Duplex:  Set the margins for double-sided 

printing.

Set the margins for print materials. The margins 

you set here will be applied when printing from 

the multi-purpose tray.

•

Simplex:  Set the margin of print materials 

for one-sided printing. 

•

Duplex:  Set the margins for double-sided 

printing. 

When creating an emulation print page which 

does not include margin information, the 

machine uses the margin value set here.

•

Top Margin:  Set the top margin, from 0.0 to 

250mm.

•

Left Margin:  Set the left margin, from 0.0 to 

164mm.