2. Press up/down arrow to highlight Information and press OK.
3. Press up/down arrow to highlight Configuration and press OK.
4. The display shows Print?, then press OK to print the configuration

report.

Monitoring the supplies life

To view the supply life indicators, follow the steps below:

1. Press

on the control panel.

2. Press up/down arrow to highlight System Setup and press OK.
3. Press up/down arrow to highlight Maintenance and press OK.
4. Press up/down arrow to highlight Supplies Info. and press OK.
5. The display shows options as you press up/down arrow.

Cleaning a fuser belt

If you are experiencing blurred, faded, or smeared printouts, you can clear

the problem by printing a cleaning sheet, provided by your printer.
You can Print:

1. Press

on the control panel.

2. Press up/down arrow to highlight System Setup and press OK.
3. Press up/down arrow to highlight Maintenance and press OK.
4. Press up/down arrow to highlight Clean Fuser and press OK.

Your machine automatically picks up a sheet of paper from the tray and

prints out a cleaning sheet with dust or toner particles on it.

Using Toner Low Alert

If toner in the cartridge has run out, a message informing user to change the

toner cartridge appears. You can set the option for this message to appear

or not.

1. Press

on the control panel.

2. Press up/down arrow to highlight System Setup and press OK.
3. Press up/down arrow to highlight Maintenance and press OK.
4. Press up/down arrow to highlight Toner Low Alert and press OK.

Cleaning a machine

If printing quality problems occur or if you use your machine in a dusty

environment, you need to clean your machine regularly to keep the best

printing condition and use your machine longer.

•

Cleaning the cabinet of the machine with cleaning materials

containing large amounts of alcohol, solvent, or other strong

substances can discolor or distort the cabinet.

•

If your machine or the surrounding area is contaminated with

toner, we recommend you use cloth or tissue dampened with

water to clean it. If you use a vacuum cleaner, toner blows in the

air and might be harmful to you.

Cleaning the outside

Clean the machine cabinet with a soft, lint-free cloth. Dampen the cloth

slightly with water, but be careful not to let any water drip onto or into the

machine.

Cleaning the inside

During the printing process, paper, toner, and dust particles can accumulate

inside the machine. This buildup can cause print quality problems, such as

toner specks or smearing. Cleaning the inside of the machine clears and

reduces these problems.
1. Turn the machine off and unplug the power cord. Wait for the machine to

cool down.

2. Using the handle, completely open the front cover.

•

Do not touch the green surface, the OPC drum or the front of

the print cartridge, with your hands or any other material. Use

the handle on each cartridge in order to avoid touching this

area.

•

Be careful not to scratch the surface of the paper transfer belt.

•

If you leave the front cover open for more than a few minutes,