Samsung SCX-4725FN Manual De Usuario

.1   

<Network setup (SCX-4725FN only)>

(SCX-4725FN only)

Connecting your machine to a network is available only on the 
SCX-4725FN. This chapter gives you step-by-step instructions for setting 
up your machine for network connections.

This chapter includes:

Once you have connected your machine to a network with an RJ-45 
Ethernet cable, you can share the machine with other network users.

You need to set up the network protocols on the machine to use it as your 
network printer. Protocols can be set up by the following two methods: 

You can configure your machine’s print server settings and manage the 
machine via the following programs that came with your machine:
• SyncThru™ Web Admin Service: Web-based printer management 

solution for network administrators. SyncThru™ Web Admin Service 
provides you with an efficient way of manageing network devices and 
lets you remotely monitor and troubleshoot network machines from 
any sith with corporate internet access. Download this program from 

• SyncThru™ Web Service: A web server embedded to your network 

print server, which allows you to:
-  Configure the network parameters necessary for the machine to 

connect to various network environments.

-  Customize printer, copy, and fax settings.

• SetIP: Utility program allowing you to select a network interface and 

manually configure the IP addresses for use with the TCP/IP protocol. 
See Using SetIP program on page 4.2.

You can set up the following basic network parameters through the 
machine’s control panel:
• Configure TCP/IP
• Configure EtherTalk

The following table shows the network environments supported by the 
machine: 

• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol

Your machine can be set up with a variety of TCP/IP network information, 
such as an IP address, a subnet mask, and a gateway. There are several 
ways in which your machine can be assigned a TCP/IP address, 
depending on your network.
• Static addressing: A TCP/IP address is assigned manually by the 

system administrator.

• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address is 

assigned automatically by the server.

Before configuring TCP/IP, you need to set the network protocol 
to TCP/IP.

Network interface

• 10/100 Base-TX

Network operating 
system

• Windows 98/Me/2000/XP(32/64bit)/

2003(32/64bit)

• Various Linux OS
• Macintosh OS 10.3~10.4

Network protocols

• TCP/IP on Windows 
• EtherTalk 

Dynamic addressing 
server

• DHCP, BOOTP