Samsung SCX-4725FN Manual De Usuario

5.6   

<Loading originals and print media>

Load the paper with the side to be printed on facing up.

Squeeze the paper width guide and adjust it to the width of the 
paper.

Squeeze the paper length guide and adjust it to the length of the 
paper.

After loading paper, set the paper type and size for the tray. See 
page 5.7 for copying and faxing or the Software Section for PC-
printing.

• Do not push the paper width guide far enough to cause 

the materials to warp.

• If you do not adjust the paper width guide, it may cause 

paper jams.

The manual tray can hold special size and type of print material, such as 
transparency, postcard, note card, and envelope. The manual tray can 
hold 1 sheet of paper.

To load paper in the manual tray:

Load the paper with the side to be printed on facing up.

Adjust the manual tray paper width guides to the width of the paper. 
Do not force too much, or the paper will be bent, which will result in 
a paper jam or skew.

• If you experience problems with paper feed, place one sheet at 

a time in the manual tray.

• You can load previously printed paper. The printed side should 

be facing down with an uncurled edge at the front. If you 

experience problems with paper feed, turn the paper around. 

Note that print quality is not guaranteed. 

Depending on the media type you are using, keep the following 
loading guidelines:
• Envelopes: Flap side down and with the stamp area on the top 

left side.

• Transparencies: Print side up and the top with the adhesive 

strip entering the machine first.

• Labels: Print side up and top short edge entering the machine 

first.

• Preprinted paper: Design side up with the top edge toward the 

machine.

• Card stock: Print side up and the short edge entering the 

machine first.

• Previously printed paper: Previously printed side down with an 

uncurled edge toward the machine.