Samsung CLP-610 Manual De Usuario

1.9   

<Introduction>

PCL
This menu sets the PCL emulation configuration. 
You can set the font type, symbol type, lines per 
page, and font size.
• Typeface: You can select the standard font to 

be used in PCL emulation. PCL1~PCL7's 
interval between letters is fixed, and 
PCL8~PCL45's interval is proportional to the 
font type and font size. You can adjust the font 
size of PCL1~PCL7 using the Pitch item, and 
PCL8~PCL45 can do using Point Size item. 
PCL8~PCL56's interval and font size are fixed.

• Symbol: This item selects the symbol set to 

be used in PCL emulation. The symbol is the 
group of numbers, marks, and special signs 
being used when printing letters. Depending 
on the Typeface setting, available symbol sets 
vary.

• Point Size: When you select one between 

PCL8 and PCL45 from the Typeface menu, 
you can determine the font size by setting the 
height of the characters in the font.

• Courier: This item lets you select the version 

of Courier font to use.

• Pitch: When you select one between PCL1 

and PCL7 from the Typeface menu, you can 
determine the font size by setting the number 
of characters that will print in one horizontal 
inch of type. The default value, 10 is the best 
size.

• Lines: This item allows you to set vertical 

spacing from 5 to 128 lines for the default 
paper size. The default number of lines may 
differ according to the paper size and printing 
orientation.

PostScript
This menu provides you with the Print PS Error 
menu item. You can select whether or not your 
printer prints an error list when a PS error 
occurs. Select On to print PS 3 emulation errors. 
If an error occurs, the job stops processing, the 
error message prints, and the printer flushes the 
job. If this menu is set to Off, the job is flushed 
without an indication of the error.

This menu allows you to adjust contrast, color by 
color.
• Default: Optimizes colors automatically.
• Manual Adjust: Allows you to manually adjust 

the color contrast for each cartridge.

It is recommended to use the Default setting for 
best color quality.

The machine can automatically adjust the 
engine color alignment for text or graphics. 

If you have moved the machine, it is 
strongly recommended to operate this 
menu manually. 

If you are using the TCP/IP protocol for 
networking, select this menu. 
• DHCP: The DHCP server allots an IP address 

to you automatically.

• BOOTP: The BOOTP server allots an IP 

address to you automatically.

• Static: You can enter an IP address, 

subnetmask, and gateway manually.

This item allows you to select the communication 
speed for ethernet connection. 

You can clear the network setting you have set.

You can print the network configuration report.