Samsung SCX-6122FN Manual De Usuario

5.8   

<Loading originals and print media>

• Load only one size of print media at a time in the multi-purpose tray.
• To prevent paper jams, do not add paper when there is still paper in 

the multi-purpose tray. This also applies to other types of print media.

• Print media should be loaded face down with the top edge going into 

the multi-purpose tray first and be placed in the center of the tray.

• Always load only the print media specified in page 5.2 to avoid paper 

jams and print quality problems.

• Flatten any curl on postcards, envelopes, and labels before loading 

them into the multi-purpose tray.

• Make sure to open the rear cover when you print on transparencies. If 

not, they may tear while exiting the machine.

After loading paper in the paper tray, you need to set the paper size and 
type using the control panel buttons. These settings will apply to Copy 
and Fax modes. For PC-printing, you need to select the paper size and 
type in the application program you use on your PC.

Press Menu until System Setup appears on the bottom line of the 
display and press OK.

Press the Scroll buttons until Paper Setup appears and press OK.

Press OK when Paper Size appears.

Press the Scroll buttons until the paper tray you want appears and 
press OK. 

Press the Scroll buttons until the paper size you are using appears 
and press OK. 

Press Back to return to the upper level.

Press the Scroll buttons until Paper Type appears and press OK.

Press the Scroll buttons until the paper type you are using appears 
and press OK. 

Press Stop/Clear to return to Standby mode.