Samsung SPP-R200 Manual De Usuario

 

 

• Power Button 

 

This button is used to turn the printer on and off. 
When the printer is off, pressing this button for approximately 2 
seconds will turn the power on.  When the printer is on, pressing 
this button for approximately 2 seconds will turn the power off.

 

• Paper Feed Button 

 

Paper output can be done manually by pressing this button. 
In addition, self-testing and Hexadecimal Dumping can be done. 
1) Refer to “4. Self-Test” for self-test information. 
2) Refer to the service manual regarding Hexadecimal Dumping.

 

• Battery Status Lamp (Blue or Red) 

 

1) If three blue lamps are lit, the battery is fully charged. 
2) If two blue lamps are lit, the battery is half charged. 
3) If one blue lamp is lit, the battery is at the lowest charge level. 
4) If the red lamp is lit, the battery must be charged or replaced.

 

• Error Lamp (Red) 

 

1) If the red lamp is lit, the paper cover is open. 
2) If the red lamp is blinking, either the paper has been fully used or 

the print head is overheated. 
(Fill with paper or turn the printer off for at least 10 minutes.) 

3) If the red lamp continues to blink, it may indicate a more serious 

problem with the product, and thus an authorized service dealer 
should be consulted. 

• Bluetooth Lamp (Green) 

 

1) If the green lamp turns on in unison with the battery status lamp, 

the printer can be used with Bluetooth wireless communication. 

2) If only the green lamp is lit, the printer has entered the power 

saving mode. 

The power saving mode is activated after the first communication, with the 
default time interval being 10 seconds.