Samsung CLP-660 Manual De Usuario

1.8   

<Introduction>

You can select the tray to process the print job. If 
you select Auto, your machine supplies the 
paper from the multi-purpose tray first, then the 
tray 1, and tray 2 for the last. So if any tray is 
empty, then the machine tries to search the 
paper from the next available tray. (See page 3.5 
for more information)

When you select any other value except Auto 
from Paper Source and the selected tray is 
empty, you can set the machine to automatically 
print from other trays.
If this menu item is set to Off, the machine does 
not print until you insert paper into the specified 
tray.

You can select the default resolution. If the 
resolution is high, the clarity of the printouts is 
sharper, but the print time may take longer.
• Draft: If the printer language is PCL and your 

print jobs are text, select this option for the 
best speed and printing quality. This option is 
available only with PCL driver.

• Normal: If your print jobs are mostly text, 

select this option for the highest quality output.

• Best: select this option when your job contains 

bitmapped images, such as scanned photos or 
certain business graphics, that will benefit 
from enhanced line screening.

The language setting for the display on the 
control panel determines the language of the text 
that appears on the control panel display and for 
printing information. (See page 3.4 for more 
information)

When the machine does not receive data for an 
extended period of time, power consumption is 
automatically lowered. You can set how long the 
machine waits before going to power save. (See 
page 3.5 for more information)

This item determines whether or not the machine 
continues printing when it detects paper that is 
not matched to your paper setting.
• Off: If a paper mismatch occurs, the message 

remains on the display and the machine 
remains off-line until you insert the correct 
paper.

• On: If the paper is mismatched, an error 

message displays. The machine goes off-line 
for 30 seconds then automatically clears the 
message and continues printing.

You can optimize the print quality according to 
your altitude.

This option allows you to append the required 
carriage return to each line feed, which is useful 
to the Unix user or DOS user.
Refer to the following samples:

You can set the amount of time a single print job 
is active before it must print. The machine 
handles incoming data as a single job, if it comes 
in within the specified time. When an error 
occurs while processing data from the computer 
and the data flow stops, the machine waits the 
specified amount of time and then cancels 
printing if data flow does not resume. (See page 
3.4 for more information)

This menu allows you to maintain consumables 
within the machine and check supplies' life. You 
can clean fuser components. (See page 6.1 for 
more information)

This menu item allows you to restore the 
printer's factory default settings.

You can select the machine language. If the 
languages from the computer and the machine 
are different, the printing quality can not be 
confirmed. It is recommended to set this menu to 
Auto to switch the proper language.

LF

LF+CR

 

 AA

     BB

         CC

 

 AA

 BB

 CC