Samsung ML-1630W Manual De Usuario

3.2   

<Getting Started>

You need to set up the network protocols on the machine to use it as your 
network printer.

The following table shows the network environments supported by the 
machine: 

• If you want to use the USB cable, connect the cable between a 

computer and you machine. Then, refer to the software 

installation in Software section.

Network interface

10/100 Base-TX
802.11 b/g Wireless LAN

Network operating 
system

Windows 2000/2003/XP/Vista
Various Linux OS
Macintosh Mac OS 10.3 ~ 10.5

Network protocols

TCP/IP, Standard TCP/IP, LPR, IPP/ HTTP,  
Bonjour, DHCP, BOOTP

• SyncThru™ Web Admin Service: Web-based printer 

management solution for network administrators. SyncThru™ 
Web Admin Service provides you with an efficient way of 
manageing network devices and lets you remotely monitor and 
troubleshoot network machines from any sith with corporate 
internet access. Download this program from 

.

• SyncThru™ Web Service: A Web server embedded to your 

network print server, which allows you to configure the network 
parameters necessary for the printer to connect to various 
network environments.

• SetIP: Utility program allowing you to select a network interface 

and manually configure the IP addresses for use with the TCP/
IP protocol. See "Using SetIP program" on page 3.2.

This program is for the network IP setting using the MAC address which 
is the hardware serial number of the network printer card or interface. 
Especially, it is for the network administrator to set several network IPs at 
the same time. 

The following procedure is based on windows XP. If you use Macintosh 
or Linux OS, see Software section.

•You can only use SetIP program when your machine is 
connected to a network.
•The following procedure is based on the Windows XP 
operating system.
•If you are in a non-static IP address environment and need to 
setup a DHCP network protocol, go to the http://
developer.apple.com/networking/bonjour/download/, select the 
program Bonjour for Windows due to your computer operating 
system, and install the program. This program will allow you to 
fix the network parameter automatically. Follow the instruction in 
the installation window. This program does not support Linux.

Insert the driver CD provided along with your machine. When the 
driver CD runs automatically, close the window.

Start Windows Explorer and open the X drive. (X represents your 
CD-ROM drive.)

Double click Application > SetIP.

Double click Setup.exe to install this program. 

Click OK.
If necessary, select a language from the drop-down list.

Follow the instruction on the window to complete the installation.

Connect the network cable to your machine.

Print the machine’s network information report which inclues your 
machine’s MAC address. See "Printing a machine report" on 
page 6.1.

From the Windows Start menu, select All Programs > Samsung 
Network Printer Utilities > SetIP > SetIP.

Click 

in the SetIP window to open the TCP/IP configuration 

window.

Enter the network card's MAC address, IP address, subnet mask, 
default gateway, and then click Apply.

when you enter the MAC address, enter it without colon(:).