Samsung CLP-610 Series Manual De Usuario

4.4   

<Selecting and loading print media>

Using photographic paper or coated paper may cause 
problems, requiring repairs. Such repairs are not covered by 
Samsung’s warranty or service agreements.

Preprinted 
paper

• Letterhead must be printed with heat-resistant 

ink that will not melt, vaporize, or release 
hazardous emissions when subjected to the 
printer’s fusing temperature for 0.1 second. 
Check your machine’s specification to view the 
fusing temperature, see page 10.1.

• Letterhead ink must be non-flammable and 

should not adversely affect printer rollers.

• Forms and letterhead should be sealed in a 

moisture-proof wrapping to prevent changes 
during storage.

• Before you load preprinted paper, such as forms 

and letterhead, verify that the ink on the paper is 
dry. During the fusing process, wet ink can come 
off preprinted paper, reducing print quality.

Load the print media you use for the majority of your print jobs in tray 1. 
Tray 1 can hold a maximum of 250 sheets of 75 g/m

2

 (20 lb bond) plain 

paper. 

You can purchase an optional tray and attach it below the standard tray 
to load an additional 500 sheets of paper. (See "Accessories" on 
page 8.1.)

To load paper, pull and open the paper tray and place paper with the 
side you want to print facing up.

After loading paper, set the paper type and size for the tray 1. See 
Software section for PC-printing.

• If you experience problems with paper feed, place one sheet at 

a time in the multi-purpose tray.

• You can load previously printed paper. The printed side should 

be facing up with an uncurled edge at the front. If you 

experience problems with paper feed, turn the paper around. 

Note that print quality is not guaranteed. 

Full

Empty