Samsung CLP-610 Series Manual De Usuario

7.7   

<Troubleshooting>

Pull the jammed paper out in the direction shown. To avoid tearing 
the paper, pull it out gently and slowly.

Close the front cover firmly. The machine will resume printing.

If the front cover is not completely closed, the machine will not 
operate.

Messages appear on the Smart Panel program window or on the control 
panel display to indicate machine status or errors. Refer to the tables 
below to understand the messages meaning to correct the problem, if 
necessary. Messages and their explanations are listed in alphabetical 
order.

• When you call for service, it is very convenient to provide the 
service representative with the contents of the display message.
• If the message is not in the table, cycle the power and try the 
printing job again. If the problem persists, call for service. 
• Some messages may not appear in the display depending on 
options or models. If so, it is not applicable to your machine.

* xxx indicates the media type.
* yyy indicates the tray.

The tray cassette is 
not inserted, or not 
properly closed.

To close the tray, 
lower the rear edge, 
align it with the slot, 
and slide it into the 
printer.

There is no paper in 
the tray.

Load paper in the 
tray. (Page 4.4)

There is a problem 
in the ADC (Analog 
to Digital Converter) 
of your machine.

Cycle power. If the 
problem persists, 
contact the service 
representatives.

The temperature 
slope for ADC 
(Analog to Digital 
Converter) detects 
the value out of the 
normal range.

Cycle power. If the 
problem persists, 
contact the service 
representatives.

The machine is 
adjusting the color 
registration.

Wait a few minutes.

There is a problem 
with the 
development motor 
to machines which 
moves the toner 
supply device.

Cycle power. If the 
problem persists, 
contact the service 
representatives.

The front cover or 
the top cover is not 
securely latched.

Close the cover until it 
locks into place.