Samsung SCX-5935 Series Manual De Usuario

Getting started_ 32

2.

getting started

This chapter gives you step-by-step instructions for setting up the USB connected machine and software.

•

•

•

•

•

  

This section shows the steps to set up the hardware, as is explained in the 

Quick Install Guide. Make sure you read the Quick Install Guide first and 

follow the steps below:
1. Select a stable location.

Select a level, stable place with adequate space for air circulation. Allow 

extra space to open covers and trays. 

The area should be well ventilated and away from direct sunlight or 

sources of heat, cold, and humidity. Do not set the machine close to the 

edge of your desk or table.

Printing is suitable for altitudes under 1,500 m (4,921 ft). Refer to the 

altitude setting to optimize your printing. (See "Altitude adjustment" on 

page 41.)

Place the machine on a flat, stable surface so that there is no incline 

greater than 2 mm (0.08 inch). Otherwise, printing quality may be 

affected.

2. Unpack the machine and check all the enclosed items.

3. Remove tape holding the machine securely.
4. Install the toner cartridge.
5. Load paper. (See "Loading paper in the tray" on page 46.)
6. Make sure that all cables are connected to the machine. 
7. Turn the machine on.

After you have set up your machine and connected it to your computer., you 

must install the printer and scanner software using the supplied CD . The 

software CD provides you with the following software.

•

Printer driver :  Use this driver to take full advantage of 

your machine’s features.

•

PostScript printer driver :  Use the PostScript driver to 

print documents with complex fonts and graphics in the 

PS language.

•

Scanner driver :  TWAIN and Windows Image 

Acquisition (WIA) drivers are available for scanning 

documents on your machine.

•

Smart Panel :  This program allows you to monitor the 

machine’s status and alerts you when an error occurs 

during printing.

•

 :  This program is the accompanying 

Windows-based software for your multifunctional 

machine. 

•

Direct Printing Utility :  This program allows you to 

print PDF files directly.

•

Samsung Scan Manager :  You can find out about 

Scan Manager program information and installed scan 

driver's condition.

•

SetIP :  Use this program to set your machine’s TCP/IP 

addresses.