Samsung SCX-5935 Series Manual De Usuario

Machine status and advanced feature_ 92

11.

machine status and advanced feature

This chapter explains how to browse the current status of your machine, and the method of setting for the advanced machine 
setup. Read this chapter carefully in order to use your machine's diverse features.

•

•

•

•

•

•

•

•

•

•

  

1. Press Machine Setup on the control panel.
2. Select the appropriate item you want to use.

•

Machine Status :  Shows the current machine status.

•

Admin Setting :  Allows administrator to set up the machine.
When you press Admin Setting, a login message pops up. Enter 

password and press OK. (Factory setting is 1111.)

•

Usage Page Report :  You can print the report on the amount of 

printouts depending on the paper size and type.

Press Machine Setup on the control panel, then press Machine Status.

•

Supplies Life tab :  Displays both the amount of machine supplies used 

and remaining. Use up/down arrows to switch screens.

•

Machine Info tab :  Displays detailed information about the machine, as 

well as some options to allow validating your machine.

•

Back :  Returns to the previous screen.

Gives you access to detailed machine settings.

When you press Admin Setting, a login message appears. If the 

administrator set the password, you have to enter the password every 

time you want to use Admin Setting. (See "Setting the authentication 

password" on page 41.)

•

General tab :  Sets the basic parameters of the machine, such as 

location, date, time, and more. (See "General settings" on page 92.)

•

Setup tab :  Sets the values for fax, network, and login. You can also 

enable the features listed on the screen.

•

Print/Report tab :  Prints configuration or font list and displays a report 

of machine features. (See "Printing a report" on page 96.)

•

Back :  Returns to the previous screen.

You can browse the machine information and validate some features of the 

machine.
1. Press Machine Setup on the control panel.
2. Press Machine Status > the Machine Info tab.

Before using the machine, set up the machine parameter, as follows:
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter 

password and press OK. (Factory setting is 1111.)

3. Press the General tab.

This option shows the customer support 

information on the email address and the phone 

number you stored from Admin Setting. Also, 

you can check the machine's serial number, or 

the hardware and software information 

specification.

You can print various helpful and informative 

reports, such as System Report, Fax Report 

and Scan Report. (See "Printing a machine 

The screen shows the trays installed on your 

machine and their current configurations.

You can view the amount of each category that 

your machine has printed so far. Print this 

report. (See "Printing a report" on page 96.)

The sub-options available are Service Center 

Registration and Contact Info. You may enter 

information on service center and purchasing 

point.

You can set the date and time. (See "Setting the