Samsung CLX-8380 Manual De Usuario
12.22
<Troubleshooting>
Common Windows problems
Note
Refer to Microsoft Windows 2000/XP/2003/Vista User’s Guide
that came with your PC for further information on Windows error
messages.
that came with your PC for further information on Windows error
messages.
Faxes do not store
in memory.
in memory.
There may not be enough memory space to
store the fax. If the display shows the low
memory message, delete any faxes you no
longer need from the memory and then try to
store the fax again. Please call for service.
store the fax. If the display shows the low
memory message, delete any faxes you no
longer need from the memory and then try to
store the fax again. Please call for service.
Blank areas
appear at the
bottom of each
page or on other
pages, with a small
strip of text at the
top.
appear at the
bottom of each
page or on other
pages, with a small
strip of text at the
top.
You may have chosen the wrong paper
settings in the user option setting. For details
about paper settings. (Page 4.9)
settings in the user option setting. For details
about paper settings. (Page 4.9)
Condition
Suggested solutions
“File in Use”
message appears
during installation.
message appears
during installation.
Exit all software applications. Remove all
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
software from the StartUp Group, then restart
Windows. Reinstall the printer driver.
“General
Protection Fault”,
“Exception OE”,
“Spool32”, or
“Illegal Operation”
messages appear.
Protection Fault”,
“Exception OE”,
“Spool32”, or
“Illegal Operation”
messages appear.
Close all other applications, reboot Windows
and try printing again.
and try printing again.
“Fail To Print”, “A
printer timeout
error occurred.”
messages appear.
printer timeout
error occurred.”
messages appear.
These messages may appear during printing.
Just keep waiting until the machine finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
Just keep waiting until the machine finishes
printing. If the message appears in standby
mode or after printing has been completed,
check the connection and/or whether an error
has occurred.
Condition
Suggested solutions
Common PostScript problems
The following situations are PS language specific and may occur when
several printer languages are being used.
several printer languages are being used.
Note
To receive a printed or screen-displayed message when
PostScript errors occur, open the Print Options window and click
the desired selection next to the PostScript errors section.
PostScript errors occur, open the Print Options window and click
the desired selection next to the PostScript errors section.
Problem
Possible Cause
Solution
PostScript file
cannot be
printed.
cannot be
printed.
The PostScript
driver may not be
installed correctly.
driver may not be
installed correctly.
• Install the PostScript
driver, referring to
Software section.
Software section.
• Print a configuration
page and verify that the
PS version is available
for printing.
PS version is available
for printing.
• If the problem persists,
contact a service
representative.
representative.
“Limit Check
Error” message
appears.
Error” message
appears.
The print job was
too complex.
too complex.
You might need to reduce
the complexity of the page
or install more memory.
the complexity of the page
or install more memory.
A PostScript
error page prints.
error page prints.
The print job may
not be PostScript.
not be PostScript.
Make sure that the print job
is a PostScript job. Check
to see whether the
software application
expected a setup or
PostScript header file to be
sent to the machine.
is a PostScript job. Check
to see whether the
software application
expected a setup or
PostScript header file to be
sent to the machine.
The optional tray
is not selected in
the driver.
is not selected in
the driver.
The printer driver
has not been
configured to
recognize the
optional tray.
has not been
configured to
recognize the
optional tray.
Open the PostScript driver
properties, select the
Device Settings tab, and
set the Tray option of the
Installable Options section
to Installed.
properties, select the
Device Settings tab, and
set the Tray option of the
Installable Options section
to Installed.
Window/
Macintosh
Macintosh
The machine does not
staple correctly when
printing more than one
copy from Acrobat
Reader with a collate
option.
staple correctly when
printing more than one
copy from Acrobat
Reader with a collate
option.
Try to print with the latest
Adobe Reader program or
print with turning on "Print
as Image" option from
Acrobat printing options. It
might take longer to print
when you print a PDF file
as an image.
Adobe Reader program or
print with turning on "Print
as Image" option from
Acrobat printing options. It
might take longer to print
when you print a PDF file
as an image.
Linux
The machine does not
staple correctly when
printing more than one
copy with a collate option
staple correctly when
printing more than one
copy with a collate option
Turning off collation options
on applications (including
CUPS pstops collation option)
may solve this problem. If you
want to use the collation
option, go to printer driver’s
advanced option and turn the
collation on.
on applications (including
CUPS pstops collation option)
may solve this problem. If you
want to use the collation
option, go to printer driver’s
advanced option and turn the
collation on.