Samsung CLX-8380 Manual De Usuario

Descargar
Página de 183
3.2   
<Getting Started>
Supported operating systems
The following table shows the network environments supported by the 
machine: 
Note
If you want to set up DHCP network protocol, go to 
, select the 
Bonjour program that is appropriate for your computer operating 
system and install the program. This program will allow you to set 
network parameters automatically. Follow the instructions in the 
installation window. This program does not support Linux.
Configuring network protocol via the machine
You can setup TCP/IP Network parameters please follow the steps listed 
below. 
1
Make sure your machine is connected to the network with an RJ-45 
Ethernet cable.
2
Make sure you turned on the machine.
3
Press Machine Setup on the control panel.
4
Press Admin Setting.
5
When the login message appears, enter password. Touch the 
password input area, then the question marks appears. Use the 
number keypad on the control panel to enter the password. Once 
the password is entered, press OK. (Factory setting:1111)
6
Press the Setup tab > Network Setup.
7
Select TCP/IP Protocol.
8
Press IP Setting
Item
Requirements
Network interface
10/100 Base-TX
Network operating 
system
• Windows 2000/XP/2003/Vista
• Various Linux OS
• Mac OS X 10.3 ~ 10.5
Network protocols
• TCP/IP on windows 
• DHCP
• BOOTP
9
Select Static and then enter IP AddressSubnet Mask and 
Gateway address fields. Touch the input area then, enter addresses 
by number keypad on the control panel. 
Note
Contact the network administrator, if you are not sure how to 
configure.
10 Press OK.
Installing the software
You have to install the machine software for printing and scanning. The 
software includes drivers, applications, and other user friendly programs. 
Note
• The following procedure is for when the machine is being used 
as a network machine. If you want to connect a machine with 
a USB cable, refer to Software section .
• The following procedure is based on the Windows XP 
operating system. The procedure and popup window which 
appears during the installation may differ depending on the 
operating system, the printer feature, or the interface in use.
(See Software section.)
Note
You can also set up the network settings through the network 
administration programs. 
• SyncThru™ Web Admin Service: Web-based printer 
management solution for network administrators. SyncThru™ 
Web Admin Service
 provides you with an efficient way of 
managing network devices and lets you remotely monitor and 
troubleshoot network machines from any site with corporate 
internet access. Download this program from 
• SyncThru™ Web Service: Web server embedded on your 
network print server, which allows you to:
-  Configure the network parameters necessary for the machine 
to connect to various network environments.
-  Customize email settings and set up address book for 
scanning to email.
-  Customize server settings and set up address book for 
scanning to the FTP or SMB servers.
-  Customize printer, copy, and fax settings.
• SetIP: Utility program allowing you to select a network interface 
and manually configure the IP addresses for use with the TCP/
IP protocol. See  page 3.4 for "Using the SetIP program".