Samsung CLX-8380 Manual De Usuario
5.6
<Copying>
Note
If this option is grayed out, select following options in the
Basic tab to activate it;
- Duplex to 1 -> 1 Sided
- Reduce/Enlarge to Original(100%)
- Paper Supply to Tray.
Basic tab to activate it;
- Duplex to 1 -> 1 Sided
- Reduce/Enlarge to Original(100%)
- Paper Supply to Tray.
5
Press On to activate this feature.
6
Press OK.
7
Press Start on the control panel to begin copying.
Note
Your original is divided into 9 portions. Each portion is scanned
and printed one by one in the following order:
and printed one by one in the following order:
Clone copying
The machine prints multiple original images on a single page. The
number of images is automatically determined by the original image and
the paper size.
number of images is automatically determined by the original image and
the paper size.
1
Place a single original face down on the scanner glass. (Page 4.1)
Note
The original must be placed on the scanner glass in order to
use this feature.
use this feature.
2
Press Copy from the Main screen.
3
Select the tray in Paper Supply.
4
Press the Advanced tab > Clone Copy.
Note
If this option is grayed out, select following options in the
Basic tab to activate it;
- Duplex to 1 -> 1 Sided
- Reduce/Enlarge to Original(100%)
- Paper Supply to Tray.
Basic tab to activate it;
- Duplex to 1 -> 1 Sided
- Reduce/Enlarge to Original(100%)
- Paper Supply to Tray.
5
Press On to activate this feature.
6
Press OK.
7
Press Start on the control panel to begin copying.
Book copying
Use this feature to copy a book. If the book is too thick, lift the scanner lid
until its hinges are engaged by the stopper and then close the scanner
lid. If the book or magazine is thicker than 30 mm (1.18 inches), start
copying with the scanner lid open.
until its hinges are engaged by the stopper and then close the scanner
lid. If the book or magazine is thicker than 30 mm (1.18 inches), start
copying with the scanner lid open.
1
Place the originals face down on the scanner glass. (Page 4.1)
Note
The original must be placed on the scanner glass to use
this feature.
this feature.
2
Press Copy from the Main screen.
3
Press the Advanced tab > Book Copy.
Note
To remove shadows of a book edge, press the Image tab >
Erase Edge > Book Center and Edge Erase.
Erase Edge > Book Center and Edge Erase.
4
Select the binding option.
• Off: Disables this feature.
• Left Page: Prints left page of the book.
• Right Page: Prints right page of the book.
• Both Page: Prints both facing pages of the book.
• Off: Disables this feature.
• Left Page: Prints left page of the book.
• Right Page: Prints right page of the book.
• Both Page: Prints both facing pages of the book.
5
Press OK.
6
Press Start on the control panel to begin copying.
Booklet copying
The machine automatically prints on one or both sides of the paper, which
are then folded to produce a booklet with all of the pages in the correct
sequence.
are then folded to produce a booklet with all of the pages in the correct
sequence.
The machine will also reduce and correctly adjust the position of each
image to fit on the selected paper.
image to fit on the selected paper.
1
Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
face down on the scanner glass. (Page 4.1)
2
Press Copy from the Main screen.
3
Select the tray in Paper Supply.