Samsung CLX-8380 Manual De Usuario

10.3   

<Machine status and advanced setup>

You can reduce energy consumption by setting 
these features. Power Saver has two options, 
first Low Power Save turns off the scanner 
lamp under the glass. Power Save turns off the 
fans within the machine except a core fan for 
the fuser unit. (Page 3.6)

This feature allows you to select the tray and 
paper you use for a printing job. Paper size, 
paper type, and paper color options are 
adjusted here. Tray Confirmation Message is 
to activate the window asking whether you set 
the paper size and type for the just opened tray.
• Auto Tray Switch: If tray1 and tray2 are filled 

with letter size paper, when tray1 is empty 
and this option is On, then the machine 
continues printing with paper in tray2.

• Auto Continue: When the paper is 

mismatched, meaning that tray1has filled with 
the letter size paper, but the printing job 
needs A4 size paper, the machine will wait for 
30 seconds to paper in tray1 with proper 
sized paper. After 30 seconds, the machine 
automatically starts printing with Letter sized 
paper.

Print quality is affected by atmospheric 
pressure, which atmospheric pressure is 
determined by the height of the machine above 
sea level. This feature lets you adjust the 
altitude in a height district. Higher altitude 
location need to set this feature to High 3, 
which affects print quality. 

Output Options is for, when the staples run 
out, you to let the machine stop processing and 
wait to refill the staples or continue the job. If 
you set Within Job Offsetting to On, the 
output paper is placed and sorted by job unit.

This feature lets you to select the priority 
between copy jobs and print jobs.
• Priority: Set the priority by numbering the 

job. The machine starts from the least to the 
highest number in order.

• First In, First Out: The machine does an 

asked job in order.

You can adjust the loudness of the machine 
sound. Press Fault to adjust the machine's 
error sound. Select Conflict if you pressed the 
wrong option. Press Selection to sound 
whenever you press the selection from your 
touch screen.

The machine gives you the notification of the 
drum and toner to reorder, and resets the used 
fuser counter, bias transfer roller, feed roller and 
document feeder friction pad counter.

The machine prints the test image patterns 
using Image Quality Test Patterns. 

You can set the machine to delete previous job 
information on HDD as you store new job 
information. To activate this feature, go to 
Admin Setting > the Setup tab > Optional 
Service and set the On Demand Image 
Overwrite option to Enable. After activating 
this feature you can overwrite a HDD by 
pressing Start in the display.

To spool documents in HDD for the network 
printing, select On.

You can choose the file policy for generating file 
name before you proceed with the job through 
HDD. If the HDD memory already has the same 
name when you entered a new file name, you 
can rename or overwrite it.
• Rename: If you HDD memory already has 

the same name when you enter a new file 
name, the file will be saved as a different 
name that is automatically programmed.

• Overwrite: You can set the machine to delete 

previous job information on HDD as you store 
new job information

You can change the country, then some the 
values for fax and paper size will be changed 
automatically for your country. After installing 
the fax kit, you must change the country.