Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Samsung
  4. SRP-270 Series
  5. Manual De Usuario

Samsung SRP-270 Series Manual De Usuario

Descargar
Página de 36
                                  13
Chapter 4. Setting the DIP switches 
 
The DIP switches are located on the bottom of the printer. The DIP switches are used to set the 
printer to perform various functions. Follow these steps when changing DIP switch  settings : 
 
1. 
Turn the printer power switch off. 
2. 
Turn the printer over and remove the dip switch cover.
 
3. 
Move the DIP switches using tweezers or another narrow-ended tool. Switches 
are on when up and off when down in the figure below.
 
4. 
The new setting takes effect when you turn on the printer.
 
 
 
 
 
 
 
 
 
 NOTE : Always change DIP switch settings when the printer is turned off.  
        Changes made with the power on have no effect until you turn the  
        printer off and then on again.