Samsung STP-102S Manual De Usuario

This equipment has been tested and found to comply with the limits for a Class A 

digital device pursuant to Part 15 of the FCC Rules.  These limits are designed to 

provide reasonable protection against harmful interface when the equipment is 

operated in a commercial environment.  This equipment generates uses, and can 

radiate radio frequency energy and, if not installed and uses in accordance with 

the instruction manual, may cause harmful interference to radio communications.  

Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at 

his own expense.

This Apparatus complies with class "A" limits for radio interference as specified in 

the Canadian department of communications radio interference regulations.

The STP-102S and STP-102P Roll Printer is designed for use with electric instruments 

such as system ECR, POS, banking equipment peripheral equipment, etc.

The main features of the printer are as follows:

   1. High speed printing

   2. Low noise thermal printing.

   3. RS-232 serial interface (STP-102S). Parallel interface (STP-102P).

   4. The data buffer allows the unit to receive print data even during printing.

   5. Different print densities can be selected by DIP switches.

Please be sure to read the instruction in this manual carefully before using your 

new STP-102S and STP-102P.

NOTE

The socket-outlet shall be near the equipment and it shall be easy 
accessible.

DATE: July. 2001
MANUAL REVISION 2.0

TEL : 82-31-210-5620
FAX : 82-31-210-5589

POWER

ERROR

FEED

ON LINE

ELECTRO- MECHANI CS