Samsung ML-167X Manual De Usuario

Troubleshooting_ 48

8.

troubleshooting

This chapter gives helpful information for what to do if you encounter an error.

•

•

•

•

  

When the toner cartridge is near the end of its life:

•

White streaks or light printing occurs. 

•

The 

 LED blinks red. 

If this happens, you can temporarily improve print quality by redistributing 

the remaining toner in the cartridge. In some cases, white streaks or light 

printing will still occur even after you have redistributed the toner.
1. Open the top cover.
2. Pull the toner cartridge out.

3. Thoroughly roll the cartridge five or six times to distribute the toner 

evenly inside the cartridge.

If toner gets on your clothing, wipe it off with a dry cloth and wash 

clothing in cold water. Hot water sets toner into fabric.

Do not touch the drum in the the toner cartridge or imaging unit. 

Use the handle on the cartridge to avoid touching this area. 

4. Hold the toner cartridge by the handle and slowly insert the cartridge into 

the opening in the machine. 
The tabs on the sides of the cartridge and corresponding grooves within 

the machine will guide the cartridge into the correct position until it locks 

into place completely.

5. Close the top cover. Ensure that the cover is securely closed. 

By selecting the correct media types, most paper jams can be avoided. 

When a paper jam occurs, refer to the guidelines below:

•

Ensure that the adjustable guides are positioned correctly. (See 

"Loading paper in the tray" on page 28.)

•

Do not overload the tray. Ensure that the paper level is below the paper 

capacity mark on the inside of the tray.

•

Do not remove paper from the tray while your machine is printing.

•

Flex, fan, and straighten paper before loading. 

•

Do not use creased, damp, or highly curled paper.

•

Do not mix paper types in a tray.

•

Use only recommended print media.

•

Ensure that the recommended side of the print media is facing the right 

side. (See "Loading paper in the tray" on page 28.)

•

If duplexing, print one sheet at a time using the 

both sides of the paper (Manual)" on page 34.)

•

If you are printing on a special paper, print one sheet at a time using the 

If a paper jam occurs, the 

 LED on the control panel lights orange. Find 

and remove the jammed paper. 
To resume printing after clearing paper jams, you must open and close the 

top cover.