Samsung 2550 Manual De Usuario
U
SING
THE
C
ONTROL
P
ANEL
3.20
Subnet Mask
You can set this item only when you set
IP Get Method to Static. This item lets
you enter the subnet mask manually.
Press the scroll button to set the value of
the 1st byte between 0 and 255, and
then press the Enter button.
IP Get Method to Static. This item lets
you enter the subnet mask manually.
Press the scroll button to set the value of
the 1st byte between 0 and 255, and
then press the Enter button.
For the 2nd to the 4th byte, you can set
the value in the same way.
the value in the same way.
Gateway
You can set this item only when you set
IP Get Method to Static. This item lets
you enter the gateway manually. Press
the scroll button to set the value of the
1st byte between 0 and 255, and then
press the Enter button.
IP Get Method to Static. This item lets
you enter the gateway manually. Press
the scroll button to set the value of the
1st byte between 0 and 255, and then
press the Enter button.
For the 2nd to the 4th byte, you can set
the value in the same way.
the value in the same way.
Config 802.11b
Configure the Wireless Network
environments.
environments.
If you select Yes, the following options
are available : SSID, Operation Mode,
Channel, Authentication, Encryption,
Using Key, KeyType and Key
are available : SSID, Operation Mode,
Channel, Authentication, Encryption,
Using Key, KeyType and Key
AppleTalk
This item lets you select whether or not
you use the AppleTalk protocol. Select
On to use the protocol
you use the AppleTalk protocol. Select
On to use the protocol
Netware
This item selects whether you want to
use the Netware protocol.
use the Netware protocol.
If you select On, you can access the
Config Netware menu item.
Config Netware menu item.
In the Config Netware menu, you can
specify the frame type parameter used
on your network.
specify the frame type parameter used
on your network.
Item
Explanation
Values: Yes, No*
Values: On*, Off
Values: On*, Off