Samsung ML-1250 Manual De Usuario

A

PPENDIX

A.9

When selecting labels, consider the quality of each component:

• Adhesives: The adhesive material should be stable at 

200 °C (392 °F), the printer’s fusing temperature.

• Arrangement: Only use labels with no exposed backing

between them. Labels can peel off sheets with spaces
between the labels, causing serious jams.

• Curl: Prior to printing, labels must lie flat with no more than

13 mm (.5 in.) of curl in any direction.

• Condition: Do not use labels with wrinkles, bubbles, or other

indications of separation.

See “Printing on Labels” on page 

Transparencies used in the printer must be able to withstand
200 °C (392 °F), the printer’s fusing temperature.

See “Printing on Transparencies” on page 

CAUTION:

To avoid damaging the printer, use only

transparencies recommended for use in laser printers.

CAUTIONS:

• To avoid damaging the printer, use only labels

recommended for laser printers.

• To prevent serious jams, always use the face-up output slot.
• Never print on the same sheet of labels more than once or

print on a partial sheet of labels.