Samsung SRP-270S Manual De Usuario

                                  2

This equipment has been tested and found to comply with the limits for a Class A digital device 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference when the equipment is operated in a commercial environment. This 

equipment generates uses, and can radiate radio frequency energy and if not installed and used 

according to the instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful interference in which 

case the user will be required to correct the interference at his own expense. 

This Apparatus complies with class “A” limits for radio interference as specified in the Canadian 

department of communications radio interference regulations. 

 

Get appareil est conforme aux normes class “A” d’interference radio tel que specifier par ministre 

canadien des communications dans les reglements d’interference radio. 

Some semiconductor devices are easily damaged by static electricity. You should turn the printer 
“

OFF”, before you connect or disconnect cables.  This will help protect the printer against static 

electricity. If the printer is damaged by the static electricity, you should turn the printer OFF, and 

refer to your local service provider. 

 

The SRP-270 Roll Printers are designed for use with electronic instruments such as system ECR, 

POS, banking equipment, computer peripheral equipment, etc. 

 

The main features of the printer are as follows: 

 

1. High speed printing : 4.6 lines per seconds. 
2. 2 color dot-matrix printer. 
3. RS-232C(SRP-270), RS-485 serial interface (SRP-270S), Parallel interface 

(SRP-270P),USB interface(SRP-270U). 

4. The data buffer allows the unit to receive print data even during printing. 
5. Peripheral units drive circuit enables control of external devices such as cash 

drawer. 

 

 Please be sure to read the instruction in this manual carefully before using your new  

 SRP-270 series. 

 

NOTE : The power-outlet should be near the equipment and it 
       should be easy accessible.