Samsung SCX-4X26 Manual De Usuario

Descargar
Página de 138
Maintenance_ 59
MAINTAINING THE CARTRIDGE
Toner cartridge storage
To get the most from the toner cartridge, keep the following guidelines in 
mind:
Do not remove the toner cartridge from its package until ready for use. 
Do not refill the toner cartridge. The machine warranty does not cover 
damage caused by using a refilled cartridge.
Store toner cartridges in the same environment as your machine.
To prevent damage to the toner cartridge, do not expose it to light for 
more than a few minutes.
Expected cartridge life
The life of the toner cartridge yield depends on the amount of toner that print 
jobs require. The actual number may also be different depending on the 
print density of the pages you print on, and the number of pages may be 
affected by operating environment, printing interval, media type, and media 
size. If you print a lot of graphics, you may need to change the cartridge 
more often.
Redistributing toner
When a toner is low, faded or light areas may appear. You can temporarily 
improve print quality by redistributing the toner.
The toner-related message saying that the toner is low may appear on 
the display.
The SmartPanel program window appears on the computer telling you 
which cartridge is low on toner.
1. Completely open the front cover.
2. Grasp the handles on the toner cartridge and pull to remove the 
cartridge from the machine.
3. Holding both handles on the toner cartridge, thoroughly rock it from side 
to side to evenly distribute the toner. 
4. Slide the toner cartridge back into the machine.
5. Close the front cover. Make sure the cover is securely latched.
Do not touch the green surface, the OPC drum or the front of the 
toner cartridge, with your hands or any other material. Use the 
handle on each cartridge in order to avoid touching this area.
Be careful not to scratch the surface of the paper transfer belt.
If you leave the front cover open for more than a few minutes, the 
OPC drum can be exposed to light. This will cause damage to the 
OPC drum. Close the front cover should the installation need to 
be halted for any reason.
If toner gets on your clothing, wipe it off with a dry
cloth and wash it in cold water. Hot water sets toner into
fabric.
If the front cover is not completely closed, the machine will not 
operate.