Samsung CLP-550N Manual De Usuario
S
PECIFICATIONS
G.10
Envelopes with Double Side Seams
Double side-seams envelopes have vertical seams at both ends
rather than diagonal seams. This style may be more likely to
wrinkle. Be sure the seam extends all the way to the corner of
the envelope as illustrated below.
rather than diagonal seams. This style may be more likely to
wrinkle. Be sure the seam extends all the way to the corner of
the envelope as illustrated below.
Envelopes with Adhesive Strips or Flaps
Envelopes with a peel-off adhesive strip or with more than one
flap that folds over to seal must use adhesives compatible with
the heat and pressure in the printer. The extra flaps and strips
might cause wrinkling, creasing, or even jams and may even
damage the fuser.
flap that folds over to seal must use adhesives compatible with
the heat and pressure in the printer. The extra flaps and strips
might cause wrinkling, creasing, or even jams and may even
damage the fuser.
Envelope Margins
The following gives typical address margins for a commercial
#10 or DL envelope.
#10 or DL envelope.
N
OTES
:
• For the best print quality, position margins no closer than 15mm
(0.6in.) from the edges of the envelope.
• Avoid printing over the area where the envelope’s seams meet.
Type of Address
Minimum
Maximum
Return address
15 mm (0.6 in.)
51 mm (2 in.)
Delivery address
51 mm (2 in.)
90 mm (3.5 in.)
Correct
Incorrect