Samsung CLP-550N Manual De Usuario

U

SING

 P

RINT

 M

ATERIALS

3.16

• Only use labels recommended for laser printers.

• Verify that the labels’ adhesive material can tolerate a fusing 

temperature of 180°C (356°F) for 0.1 seconds.

• Make sure that there is no exposed adhesive material 

between the labels. Exposed areas can cause labels to peel 
off during printing, which can cause paper jams. Exposed 
adhesives can also cause damage to the printer components.

• Never print on the same sheet of labels more than once or on 

partial sheet of labels.

• Do not use labels that are separating from the backing sheet 

or are wrinkled or damaged in any way.

• To prevent labels from sticking together, do not let the printed 

label sheets stack up as they are printed out. 

To print on labels:

Open the Multi-purpose Tray and unfold the paper support.

Load labels only in the Multi-purpose Tray with the print 
side down

and the top, short edge in first. Adjust the guide 

to fit the width of the labels.