Samsung CLP-315N Manual De Usuario

Getting started_ 23

Enter the machine’s new information into the configuration window 

as follows:

•

 : Find the machine’s MAC address from the Network 

Configuration Report and enter it without the colons.
For example, 00:15:99:29:51:A8 becomes 0015992951A8. 

•

: Enter a new IP address for your printer the same as the 

computer’s IP address except for the last number.

For example, if your computer’s IP address is 192.168.1.150, enter 

192.168.1.X. (X is number between 1 and 254 other than the 

computer’s address.)

•

: Enter this exactly the same as the computer’s Subnet 

Mask.

•

: Enter this exactly the same as the computer’s 

Default Gateway.

Click Apply, and then click OK. The machine will automatically print 

the Configuration report. Confirm that all the settings are correct.

Click Exit to close the SetIP program.

If necessary, restart the computer’s firewall.

You can also set up the various network settings through the network 

administration programs.
•

: Web-based printer management 

solution for network administrators. SyncThru™ Web Admin Service 

provides you with an efficient way of managing network devices and lets 

you remotely monitor and troubleshoot network machines from any site 

with corporate internet access. Download this program from 

.

•

: Web server embedded on your network print 

server, which allows you to: (A) Configure the network parameters 

necessary for the machine to connect to various network environments. 

(B) Customize machine settings.

You must install the printer driver software for printing. The software 
includes drivers, applications, and other user friendly programs.

Make sure that the network setup for your machine is completed. (See 

"Setting up the network" on page 21.) All applications should be closed on 

your computer before beginning the installation.
If your IP assignment method is DHCP and IP address can be changed 

whenever machine in turned on, we recommend you to use the Bonjour 

program. Go to the http://developer.apple.com/networking/bonjour/

download/, select the program Bonjour for Windows according to your 

computer operating system, and install the program. In case of Mac OS X, 

this program might be already installed in your PC. This program will allow 

you to fix the network parameter automatically. This Bonjour program does 

not support Linux.
If your IP assignment method is static, follow the steps below.
1.

Insert the Printer Software CD-ROM into your CD-ROM drive. The CD-

ROM should automatically run, and an installation window appears.

Click Next.
•

If the installation window does not appear, click Start > Run. Type 

X:\Setup.exe, replacing “X” with the letter which represents your 

drive and click OK. 

•

If you use Windows Vista, Windows 7 and Windows Server 2008 R2, 

click Start > All Programs > Accessories > Run, and type 
X:\Setup.exe.

Select Typical installation for a network printer, and then click Next.

The list of machines available on the network appears. Select the printer 
you want to install from the list and then click Next.

After the installation is finished, a window appears asking you to print a 

test page and to register yourself as a user of Samsung machines in 

order to receive information from Samsung. If you wish to do so, select 

the corresponding checkbox(es) and click Finish.

You must set up the network protocols on your machine to use it on your 

network. This chapter will show you how this is easily accomplished.

MAC address is a hardware serial number of the machine’s 

network interface and can be found in on the Network 
Configuration Report

.

The following procedure is based on Windows XP. The procedure and 

popup window which appears during the installation may differ 

depending on the operating system, machine features, or the interface 

in use.

•

The installation window may slightly differ, if you are 

reinstalling the driver.

•

: Allows you to view the User’s Guide. If 

your computer does not have Adobe Acrobat, click on this 

option and it will automatically install Adobe Acrobat Reader 

for you. 

•

If you do not see your machine on the list, click Update to 

refresh the list, or select Add TCP/IP Port to add your machine 

to the network. To add the machine to the network, enter the 

port name and the IP address for the machine.

•

To verify your machine’s IP address or the MAC address, print 

a Network Configuration Report page.

If your machine does not work properly after the installation, verify 

your network settings and try reinstalling the printer driver.

This section is applicable only for the Windows operating system.