Samsung CLP-315N Manual De Usuario

Getting started_ 29

Click Wireless and Select Wizard. Then, click Next.

Select the one Network Name(SSID) in the list.

•

: SSID(Service Set Identifier) is a name that identifies a wireless 

network. Access points and wireless devices attempting to connect 

to a specific wireless network must use the same SSID. The SSID is 

case-sensitive.

•

: Operation Mode refers to the type of wireless 

connections.

- Ad-hoc: allows wireless devices to communicate directly with each 

other in a peer-to-peer environment.

- Infrastructure: allows wireless devices to communicate with each 
other through an access point. 

Click Next.

If wireless security setting window appears, enter the registered 

password (network key) and click  Next.

 window appears, please check your 

wireless setup. If the setup is right, click Apply.

Click OK.

Now go to Installing the driver software.

You must install the printer driver software for printing. The software 
includes drivers, applications, and other user friendly programs.

If your IP assignment method is DHCP and IP address can be changed 

whenever machine is turned on, we recommend you to use the Bonjour 

program. Go to the http://developer.apple.com/networking/bonjour/

download/, select the program Bonjour for Windows according to your 

computer operating system, and install the program. In case of Mac OS X, 

this program might be already installed in your PC. This program will allow 

you to fix the network parameter automatically. This Bonjour program does 

not support Linux.
If your IP assignment method is static, follow the steps below.
1.

Insert the Printer Software CD-ROM into your CD-ROM drive. The CD-

ROM should automatically run, and an installation window appears.

Click Next.

 will help you setup the wireless network configuration. 

However, if you want to set the wireless network directly, select 
Custom

.

If your network’s operation mode is Infrastructure, select the SSID 

of the access point. If the operation mode is Ad-hoc, select the 

machine’s SSID. Note that “airportthru” is the default SSID of your 

machine.

Disconnect the network cable (standard or crossover). Your 

machine should then start communicating wirelessly with the 

network. In case of Ad-hoc mode, you can use a wireless LAN 

and wired LAN simultaneously.

If Operation Mode is Infrastructure, you must disconnect the 

network cable to activate wireless network after completing the 

network setting.

•

The following procedure is based on Windows XP. The procedure 

and popup window which appears during the installation may differ 

depending on the operating system, machine features, or the 

interface in use.

•

Make sure that the network setup for your machine is completed. 

(See "Setting up the network" on page 21.) All applications should 

be closed on your computer before beginning installation.