Samsung CLP-315N Manual De Usuario

Installing Printer Software in Windows

11

: If your printer is not already connected to the 

computer, the following window will appear.

• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click 

Next, and No on the following screen. Then the installation 

will start and a test page will not be printed at the end of the 

installation.

Select the components you want to reinstall and click 
Next

.

If you installed the printer software for local printing 
and you select your printer driver name, the window 
asking you to print a test page appears. Do as follows:
a. To print a test page, select the check box and click 

.

b. If the test page prints out correctly, click Yes.

If it doesn’t, click No to reprint it.

When the reinstallation is done, click Finish.

Start Windows.

From the Start menu select Programs or All Programs 
→ your printer driver name → Maintenance.

Select Remove and click Next.
You will see a component list so that you can remove any 
item individually.

Select the components you want to remove and then click 
Next.

When your computer asks you to confirm your selection, 
click Yes.

The selected driver and all of its components are removed 
from your computer.

After the software is removed, click Finish.

This printer provides you the printer drivers with a mono driver 
so you can use your printer as a monochrome printer. You must 
install the mono driver on your computer. Following steps guide 
you through the step by step installation process.

Make sure that the printer is connected to your computer 
and powered on. Or your computer and printer are 
connected to the network.

Insert the supplied CD-ROM into your CD-ROM drive. The 
CD-ROM should automatically run, and an installation 
window appears.

Click Cancel. 

If the confirmation window appears, click Finish.

Click Start → Printers and Faxes.

Select Add Printer.

When Add Printer Wizard appears, click Next.

Select Local printer attached to this computer, and 
Automatically detect and install my Plug and Play 
printer, then click Next. Go to step 13.
If your computer does not find the printer, then follow the 
next step.

Select Next in the Select a Printer Port window.

In the Select a Printer Port window, select Have Disk....

Click Browse to find a mono driver for your printer.

Select ***.inf file and click Open.

Click OK in the Install From Disk window.

Select a mono driver in the Printers field, and click Next.

: If you have installed a mono driver before, then the 

Use Existing Driver window. Select as the window explains, 
and click Next. Also, depending on your computer