SATO CX Series Manual De Usuario
SATO CX Series Printer
105
Set Sensor Type
Set Sensor Type
Set Sensor Type
Set Sensor Type
Command Structure
<ESC>CIa
a
a
=
0 Disable Sensor
1 Reflective (Eye-Mark) Sensing
2 Transmissive (Label Gap or Notch) Sensing
1 Reflective (Eye-Mark) Sensing
2 Transmissive (Label Gap or Notch) Sensing
Example:
<ESC>CI1
Placement:
This command should be sent in a separate
data stream.
data stream.
Default:
<ESC>CI2 (Transmissive Sensing)
Command Function
To select the top-of-label sensing method.
Input to Printer
<ESC>A
<ESC>CI2
<ESC>Z
<ESC>CI2
<ESC>Z
Printer Output
There’s is no printer output as a result of this command.
Special Notes
1. The reflective Eye-Mark, label gap or notch must be a
minimum of 3.1mm (.125") wide and extend 21.5 mm
(0.85") from the left (facing the printer) edge of the label
backing.
(0.85") from the left (facing the printer) edge of the label
backing.