SATO CX Series Manual De Usuario
SATO CX Series Printer
19
Characters, Custom-Designed
Characters, Custom-Designed
Characters, Custom-Designed
Characters, Custom-Designed
Command Structure
Store Command:<ESC>Tabcc
Recall Command:<ESC>Kab90cc
a
Recall Command:<ESC>Kab90cc
a
=
1 16x16 matrix
2 24x24 matrix
2 24x24 matrix
b
=
Specifies the character encoding method for
the data stream
H Hexadecimal characters
B Binary characters
the data stream
H Hexadecimal characters
B Binary characters
cc
=
Memory location to store/recall the character.
Valid memory locations are 21 to 52 (counting
in Hex or “!” to “R” in Binary
Valid memory locations are 21 to 52 (counting
in Hex or “!” to “R” in Binary
Example:
<ESC>T1H3F
<ESC>K1H903F
<ESC>K1H903F
Placement:
The Store command is typically sent in its own
data stream to the printer, between the Start/
Stop commands. The Recall command is sent
in a secondary data stream to print the charac-
ter, and follows any necessary position or size
commands.
data stream to the printer, between the Start/
Stop commands. The Recall command is sent
in a secondary data stream to print the charac-
ter, and follows any necessary position or size
commands.
Default:
None
Command Function
To allow for the creation, storage, and printing of custom
characters, such as special fonts or logos. Up to 50 individual
characters may be stored in the custom character volatile me-
mory.
characters, such as special fonts or logos. Up to 50 individual
characters may be stored in the custom character volatile me-
mory.
Printer Input
<ESC>A
<ESC>T1H3F0100038007C00FE01FF03FF87FFCFFFE07C
007C007C007C007C007C007C007C0
<ESC>Z
<ESC>T1H3F0100038007C00FE01FF03FF87FFCFFFE07C
007C007C007C007C007C007C007C0
<ESC>Z
<ESC>A
<ESC>H150
<ESC>H150