SATO CX Series Manual De Usuario

SATO CX Series Printer

Form Overlay, Store

Command Structure

<ESC>&
Example:

See above

Placement:

Must be preceded by all other data and placed
just before the Stop command (<ESC>Z)

Default:

None

Command Function

To store a label image in the volatile form overlay memory.
Only one label image may be stored in this memory area at
a time.

Input to Printer

<ESC>A
<ESC>H0100<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0100<ESC>V0165<ESC>B103100*12345*
<ESC>&
<ESC>Z

Printer Output

There is no output from this command. It stores the label
image in the overlay buffer.

Special Notes

1. Remember that this storage is volatile. Therefore, if the

printer loses power, the overlay must be sent again.

2. The overlay is recalled using the <ESC>/ Form Overlay

3. Form overlays do not have to be re-compiled each time

they are called to be printed and therefore may result in
much faster print output.

4. The Expanded Print Length <ESC>AX, (See page 55),

cannot be used with this command. The maximum
length label that can be used with Forms Overlay is
177mm (7").