SATO CX Series Manual De Usuario
60
SATO CX Series Printer
Print Speed
Print Speed
Print Speed
Print Speed
Command Structure
<ESC>CSa
a
a
=
Designates the speed selection
2 =50 mm/s (2"/ps)
3 =75 mm/s (3"/ps)
2 =50 mm/s (2"/ps)
3 =75 mm/s (3"/ps)
Example:
<ESC>CS3
Placement:
Must be placed immediately after <ESC>A
and immediately before <ESC>Z in its own
separate data stream
and immediately before <ESC>Z in its own
separate data stream
Default:
As previously set in the printer configuration
Command Function
To specify a unique print speed through software for a parti-
cular label. This allows flexibility in finding the best perfor-
mance and quality for the particular label format, media, and
ribbon. All subsequent labels will print at this speed unless
the speed is changed with this command.
cular label. This allows flexibility in finding the best perfor-
mance and quality for the particular label format, media, and
ribbon. All subsequent labels will print at this speed unless
the speed is changed with this command.
Input to Printer
<ESC>A
<ESC>CS3
<ESC>Z
<ESC>CS3
<ESC>Z
Printer Output
There is no printer output for this command. It sets the print
speed of the printer to 3 inches per second.
speed of the printer to 3 inches per second.
Special Notes
1. This becomes the new setting in the printer configuration
for all subsequent print jobs, unless changed. The setting
is stored in non-volatile memory and is not affected by
cycling the power.
is stored in non-volatile memory and is not affected by
cycling the power.