Samsung 7300N Manual De Usuario
S
ETTING
U
P
Y
OUR
P
RINTER
2.8
To print from computer software, you need to connect your printer to your
computer with a parallel interface cable.
computer with a parallel interface cable.
The parallel cable should be compatible with the Centronics
R
parallel interface
and IEEE standard 1284. If you purchase a parallel cable, ensure that it :
•
•
Is compatible with Centronics interface.
•
Supports bi-directional communications(IEEE standard 1284).
•
Is shielded.
•
Has the appropriate connector :
- 25 pin D-Sub connector on the computer side.
- Amphenol 36 connector on the printer side.
- Amphenol 36 connector on the printer side.
Connecting the Parallel Cable
Cable Specifications (Not provided)
Connecting the Parallel Cable
2
Plug the appropriate end of the
parallel cable into the connector on
the rear of the printer.
parallel cable into the connector on
the rear of the printer.
To connect the printer to your computer use a parallel cable and
proceed as follows.
proceed as follows.
1
Check that both the printer and the computer to which it is to be connected
are powered off and disconnected from the power point.
are powered off and disconnected from the power point.