Samsung CLP-310 Manual De Usuario

Using Your Printer in Linux

29

This program is for the network IP setting using the MAC 
address which is the hardware serial number of the network 

printer card or interface. Especially, it is for the network 
administrator to set several network IPs at the same time. 

SetIP program should be automatically installed during the 
printer driver installation.

Print the machine’s network information report which 
includes your machine’s MAC address.

Open the /opt/Samsung/mfp/share/utils/.

Double click the SetIPApplet.html file.

Click 

in the SetIP window to open the TCP/IP 

configuration window.

Enter the network card's MAC address, IP address, subnet 
mask, default gateway, and then click Apply.

: when you enter the MAC address, enter it without 

colon(:).

The machine prints the network information. Confirm all 
the settings are correct.

Close the SetIP program.

Unified Linux Driver Configurator is a tool primarily intended for 

configuring Printer.
After installing the Unified Linux driver, the Unified Linux Driver 
Configurator icon will automatically be created on your desktop.

Double-click Unified Driver Configurator on the 
desktop.
You can also click the Startup Menu icon and select 
Samsung Unified Driver and then Unified Driver 

Configurator.

Press each button on the Modules pane to switch to the 
corresponding configuration window.   

You can use the onscreen help by clicking Help.

After changing the configurations, click Exit to close the 
Unified Driver Configurator.

Printers Configuration button

Ports Configuration button