Samsung 3560 Manual De Usuario

Installing Printer Options

9.8

Find the location of the connector and the optional Tray 2 
positioners.

Place the printer over the optional Tray 2, aligning the feet 
on the printer with the positioners on the optional Tray 2.

: The printer weights 23kg including the toner 

cartridge and the tray. Use safe lifting and handling 

techniques. If you need to move the printer, it should be 

moved by two people. Use the lifting handles as shown in 

page 1.3. Back injury could result if a single person attempts 

to lift the printer.

Lifting handles 
are located at 
the lower edge 
of both sides of 

the printer. 

Plug the optional Tray 2 cable into the optional Tray 2 cable 
connector on the back of the printer.

Load paper in the optional Tray 2. The instructions for 
loading paper in the optional Tray 2 are same as for 
loading in the Tray 1. See page 2.4.

Reconnect the power cord and cables and then turn the 
printer on.

:

 Do not remove the Tray 1 from the printer while you 

are printing using the optional Tray 2. If you do this, a paper jam 

may occur. Use the optional Tray 2 with the Tray 1.

After installing optional Tray 2, you must set the tray as 
installed in the printer properties window.

Click the Windows Start menu.

For Windows 9x/Me/NT4.0/2000, select Settings and then 
Printers.

For Windows XP/2003, select Printers and Faxes.

Select the Samsung ML-3560 Series PCL 6 printer icon 
or Samsung ML-3560 Series PS printer icon.

Right-click on the printer icon and select Properties.

In PCL 6 Properties, click the Printer. Then select Tray 2 
from the Optional Tray drop-down list.

In PS Properties, click the Device Option tab and select 
Installed from the Tray 2 drop-down list.

Click OK.