Samsung CLP-325W Manual De Usuario

Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 36

example, 00:15:99:29:51:A8 becomes 0015992951A8.

•

: Enter a new IP address for your printer.

For example, if your computer’s IP address is 192.168.1.150, 

enter 192.168.1.X. (X is number between 1 and 254 other than 

the computer’s address.)

•

: Enter a Subnet Mask.

•

: Enter a Default Gateway.

Select Apply, then OK, and OK again. The printer will automatically 

print the configuration report. Confirm that all the settings are correct. 
Quit Safari

. You may close and eject the installation CD-ROM. If 

necessary, restart the computer’s firewall. You have successfully 

changed the IP address, subnet mask, and gateway.

SetIP program should be automatically installed during the printer driver 

installation.

The path and UIs may differ by Linux OS version. Refer to the 

Linux OS manual to turn firewall off.

Print the machine’s network configuration report to find your machine’s 

MAC address. 

Open the /opt/Samsung/mfp/share/utils/.

Double click the SetIPApplet.html file. 

Click to open the TCP/IP configuration window. 

Enter the network card’s MAC address, IP address, subnet mask, 

default gateway, and then click Apply. 

When you enter the MAC address, enter it without a colon(:).

The machine prints the network configuration report. Confirm all the 

settings are correct. 

Close the SetIP program. 

 is supported properly only in Windows Vista or higher.

If the IPv6 network seems to not be working, set all the network setting 

to the factory defaults and try again (See "Restoring factory default 

settings using SyncThru™ Web Service" on page 36).

To use the IPv6 network environment, follow the next procedure to use the 

IPv6 address.
The machine is provided with IPv6 feature on.
1.

Connect your machine to the network with a network cable.

Turn on the machine.

Print a Network Configuration Report from the machine’s control 

panel that will check IPv6 addresses.

Select Start > Control Panel > Hardware and Sound > Printers > Add 
Printer

.

Click Add a local printer on the Add Printer windows.

Follow the instruction on the window.

If the machine does not work in the network environment, activate 

IPv6. Refer to the next section followed by.

You can print a Network Configuration Report from the machine's 

control panel that will show the current machine’s network settings. This 

will help you to set up a network and troubleshooting problems.
To print the report:

In ready mode, press and hold the 

 (cancel button) for about 5 

seconds. You can find your machine’s MAC address and IP address.
For example:

•

MAC Address: 00:15:99:41:A2:78

•

IP Address: 192.0.0.192

Machine supports following IPv6 addresses for network printing and 

managements.

•

: Self-configured local IPv6 address. (Address 

starts with FE80.)

•

: Automatically configured IPv6 address by a 

network router.

•

: IPv6 address configured by a DHCPv6 server.

•

: Manually configured IPv6 address by a user.

Start a web browser such as Internet Explorer that supports IPv6 

addressing as a URL (See "SyncThru™ Web Service" on page 34).

For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the 

address field and press the Enter key or click Go.

When the SyncThru™ Web Service window opens, click Network 

.

Click TCP/IPv6.

Enable the Manual Address In the TCP/IPv6 section.

Select the Address/Prefix and click the Add button, then the router 

prefix will automatically be entered into the address field. 
Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. “A” is the 

hexadecimal 0 through 9, A through F.)

Click the Apply button.

Driver installation for network printer in IPv6 network environment is 

same as TCP/IPv4 (See "Installing network connected machine’s driver" 

on page 37).
Select TCP/IP Port and when the list of machines are displayed, simply 

select your machine's IPv6 address.

Start a web browser such as Internet Explorer that supports IPv6 

addressing as a URL. 

Select one of the IPv6 addresses (Link-local Address, Stateless 

, Stateful Address, Manual Address) from Network 

.

Enter the IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701]) 

Address must be enclosed in '[]' brackets.

Start a web browser such as Internet Explorer, Safari or Firefox and 

enter your machine’s new IP address in the browser window.
For example,

Click Go to access the SyncThru™ Web Service.

Click Login on the upper right of the SyncThru™ Web Service website.