Samsung CLP-325W Manual De Usuario

Media and tray_ 54

•

Do not use a paper with more than 6 mm (0.24 inch.) curl.

Close the paper cover.

Slide the tray back into the machine until it clicks.

Set the paper type and size for the tray ("Setting the paper size and 

If you experience problems with paper feeding, check whether the 

paper meets the media specifications. Then, try placing one sheet 

at a time in tray (See "Print media specifications" on page 92 or 

The tray is preset to Letter or A4 size, depending on your country. To 

change the size to A4 or Letter, you must adjust the lever and paper width 

guide properly.
1.

Pull the tray out of the machine. Open the paper cover and remove 

paper from the tray if necessary.

If you want to change the size to Letter, hold the lever at the back of the 

tray, and rotate the lever clockwise.

Squeeze the paper width guide and slide it to the edge of the lever.

If you want to change the size to A4, first move the paper width 

guide to left and rotate the lever counterclockwise. If you force the 

lever, it could damage the tray.

Pull out the paper tray. Adjust the tray size to the media size you are 

loading (See "Changing the tray size" on page 53).

Flex or fan the edge of the paper stack to separate the pages before 

loading the paper.

Place the paper with the side you want to print facing up.

Squeeze the tray paper guides and adjust them to the width and length 

of the paper. Do not force them too much or the paper will be bent result 

in a paper jam or skew.

Close the paper cover.