Samsung CLP-325W Manual De Usuario

Troubleshooting_ 76

•

Do not mix paper types in a tray.

•

Use only recommended print media ("Setting the paper size and type" 

on page 58).

•

Ensure that the recommended side of the print media is facing up in the 

tray.

To avoid tearing the paper, pull the jammed paper out slowly and 

carefully. Follow the instructions in the following sections to clear the 

jam. 

If a paper jam occurs, the status LED on the control panel lights orange. 

Find and remove the jammed paper. 
If paper is jammed in the paper feed area, follow the next steps to release 

the jammed paper. 

Open and close the front cover. The jammed paper is automatically 

ejected from the machine. If the paper does not eject, go to the next 

step.

Pull out the tray.

Remove the jammed paper by gently pulling it straight out. 

If the paper does not eject when you pull, or if you do not see the paper 

in this area, check the fuser area around the toner cartridge (See "Inside 

the machine" on page 76).

Insert the tray back into the machine until it snaps into place. Printing 

automatically resumes.

The fuser area is hot. Be careful when removing paper form this area 

to prevent getting your fingers burnt.

Open and close the front cover. The jammed paper is automatically 

ejected from the machine. If the paper does not eject, go to the next 

step.

To remove the jammed paper, open the rear cover.

Carefully remove the jammed paper by pulling in the direction as shown 

below. Most of the jammed paper can be removed in this step.

Do not touch the fuser inside the inner cover. It is hot and could 

cause burns. Be careful when removing paper from this area to 

prevent getting your fingers burnt.

If the paper does not eject when you pull, or if you do not see the paper 

in this area, check the paper exit area (See "In the paper exit area" on 

Close the rear cover. Make sure that it is securely closed. Printing 

automatically resumes.

The fuser area is hot. Be careful when removing paper form this area 

to prevent getting your fingers burnt.