Samsung CLP-325W Manual De Usuario

Supplies_ 87

A toner cartridge has reached its estimated cartridge life. The printer stops 

printing. Also, the Smart Panel program window appears on the computer 

telling you to replace the cartridge (See "Using the Smart Panel program" 

on page 69).
At this stage, the toner cartridge needs to be replaced. Check the model 

number for the toner cartridge used in your machine (See "Available 

supplies" on page 86).

Samsung does not recommend using non-genuine Samsung toner 

cartridge such as refilled or remanufactured. Samsung cannot 

guarantee non-genuine Samsung toner cartridge's quality or damages 

it can cause to the machine. Also service or repair required as a result 

of using non-genuine Samsung toner cartridges will not be covered 

under the machine warranty.

Turn the machine off, then wait a few minutes for the machine to cool.

Press the release button, completely open the front cover.

Grasp the handles on the toner cartridge and pull to remove the 

cartridge from the machine.

Take a new toner cartridge out of its package.

Pull out the hopper sheet from a new toner cartridge.

Holding both handles a new toner cartridge, thoroughly rock it from side 

to side to evenly distribute the toner.

Place the toner cartridge on a flat surface as shown below and remove 

the protecting cover.

If toner gets on your clothing, wipe it off with a dry cloth and wash it 

in cold water. Hot water sets toner into fabric.

Make sure that the color of the toner cartridge matches the color slot and 

then grasp the handles on the toner cartridge. Insert the cartridge until it 

clicks into place.

Close the front cover. Make sure the cover is securely latched and then 

turn the machine on.

If the front cover is not completely closed, the machine will not 

operate.

When the life span of the imaging unit has expired, the Smart Panel 

program window appears on the computer, indicating the imaging unit 

needs to be placed. Otherwise, your machine stops printing.