Printronix LQH-HWTM Manual De Usuario

 56

Defines both the number of times elements are duplicated 
vertically and the spacing between each duplication. 

CREATE

VDUP;

 dup#; offset#

elements to be duplicated
VDUP;OFF

VDUP

The Vertical Duplication command; enter VDUP.

dup#

Specifies number of times the entered form 
element(s) will repeat vertically. Enter a value 
ranging from 1 through 512.

offset#

Specifies the vertical offset to establish the vertical 
spacing between each duplication of the form 
element(s) specified in the body of the command. 
Enter a value in terms of dot or character columns 
based on the Scale command (page 83), or use the 
CP.DP format (page 26). The offset is from starting 
row to starting row.

VDUP;OFF

Terminates the Vertical Duplication command; 
enter VDUP;OFF. If not entered, the IGP expects 
another form element to be defined for duplication. 
A single VDUP command can define different types 
of elements for duplication.

The following example is a vertical duplication of one horizontal 
line. The line is duplicated three times. To illustrate positioning, 
the starting row and column are indicated on the example but do 
not necessarily reflect actual location on the page. 

VDUP;3;2

(3 duplications with 2-char. row spacing)

HORZ

(Command to be duplicated vertically)

1;52;15;65 
STOP

(Terminates the duplicated element command)

VDUP;OFF

(Terminates the vertical duplication)

COLUMN 15

ROW 52

ROW 54

ROW 56

COLUMN 65