Samsung C460FW Manual De Usuario
151
2. Using a Network-Connected Machine
Installing driver over the network
•
Some features and optional goods may not be available depending on
model or country (see "Features by model" on page 7).
model or country (see "Features by model" on page 7).
•
The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 22).
able to use this feature (see "Rear view" on page 22).
•
You can install the printer driver and software when you insert the
software CD into your CD-ROM drive.
software CD into your CD-ROM drive.
For windows, select the printer driver and software in the
Select
Software to Install
window.
6
Windows
The firewall software might be blocking network communication. Before
connecting the device to the network, disable the computer’s firewall.
connecting the device to the network, disable the computer’s firewall.
1
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 148).
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 148).
2
Insert the supplied software CD into your CD-ROM drive.
3
Review and accept the installation agreements in the installation
window. Then, click Next.
window. Then, click Next.
4
Select Network Connection on the Printer Connection Type screen.
5
Follow the instructions in the installation window.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line
Definition
Description
/s or
/S
Starts silent installation.
Installs machine drivers
without prompting any UIs
or user intervention.
without prompting any UIs
or user intervention.