Samsung C460FW Manual De Usuario

19 

Wi-Fi Direct is an easy-to-setup peer-to-peer connection method between the 

Wi-Fi Direct certified printer and a mobile device that provides a secure 

connection and better throughput than ad hoc mode.

With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while 

concurrently connecting to an access point. You can also use a wired network 

and a Wi-Fi Direct network simultaneously so multiple users can access and print 

documents both from Wi-Fi Direct and from a wired network.

 

•

You cannot connect your mobile device to the internet through the 
printer’s Wi-Fi Direct.

•

The supported protocol list may differ from your model, Wi-Fi Direct 
networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP 
services. 

•

The maximum number of devices that can be connected via Wi-Fi Direct 
is 3.

 

You can enable Wi-Fi Direct feature by one of the following methods.

After the driver installation is complete, Samsung Easy Printer Manager can be 

used to change Wi-Fi Direct settings.

 

Samsung Easy Printer Manager is Available for Windows

and Mac OS users only.

 

•

From  the  Start menu, select Programs or All Programs > Samsung 
Printers > Samsung Easy Printer Manager > Device Settings > Network.

-

Wi-Fi Direct On/Off: Select On to enable.

-

Device Name: Enter the printer’s name for searching for your printer on 
a wireless network. By default, the device name is the model name.

-

IP Address: Enter the IP address of the printer. This IP address is used 
only for the local network and not for the infrastructure wired or wireless 
network. We recommend using the default local IP address (the default 
local IP address of the printer for Wi-Fi Direct is 192.168.3.1)

-

Group Owner: Activate this option to assign the printer the Wi-Fi Direct 
group’s owner. The Group Owner acts similar to a wireless access point. 
We recommend activating this option.